[1970-Jan-01 00:01:36.558795]: Loading settings from string...
[1970-Jan-01 00:01:36.860889]: Parsing toolhead settings for bronx...
[1970-Jan-01 00:01:36.900879]: Rebuilding toolhead structure
[1970-Jan-01 00:01:36.950879]: Building bronx location 0...
[1970-Jan-01 00:01:37.141191]: Initialization: heater settings
[1970-Jan-01 00:01:37.143082]: storing heater 0 to time out after 3 minutes at temp, 1 minutes with no rise of 10C, fan feedforward amount 15C
[1970-Jan-01 00:01:37.158041]: Settings: Parsing home subtree...
[1970-Jan-01 00:01:37.186037]: Init endstop for axis: 0, type: load_sense, polarity: false
[1970-Jan-01 00:01:37.188032]: Init endstop for axis: 1, type: load_sense, polarity: false
[1970-Jan-01 00:01:37.189782]: Init endstop for axis: 2, type: switch, polarity: true
[1970-Jan-01 00:01:37.240853]: Parsing root settings...
[1970-Jan-01 00:01:37.291062]: STEPPER CONVERSIONS: Axis 0 steps per mm: 88.5732
[1970-Jan-01 00:01:37.322234]: STEPPER CONVERSIONS: Axis 1 steps per mm: 88.5732
[1970-Jan-01 00:01:37.324076]: STEPPER CONVERSIONS: Axis 2 steps per mm: 400
[1970-Jan-01 00:01:37.325901]: STEPPER CONVERSIONS: Axis 3 steps per mm: 108.55
[1970-Jan-01 00:01:37.327837]: STEPPER CONVERSIONS: Axis 0 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 0 tickrate 1.4007e-05 radices 32 3 30 0
[1970-Jan-01 00:01:37.340362]: STEPPER CONVERSIONS: Axis 1 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 0 tickrate 1.4007e-05 radices 32 32 30 0
[1970-Jan-01 00:01:37.342672]: STEPPER CONVERSIONS: Axis 2 periods per second 71392.9 seconds per period 1.4007e-05 slowest tickrate axis 0 tickrate 1.4007e-05 radices 32 32 32 0
[1970-Jan-01 00:01:37.344854]: STEPPER CONVERSIONS: Axis 3 periods per second 17847.6 seconds per period 5.603e-05 slowest tickrate axis 3 tickrate 5.603e-05 radices 32 32 32 31
[1970-Jan-01 00:01:37.347283]: syncing set to true
[1970-Jan-01 00:01:37.400831]: Axis count unspecified, defaulting to 4
[1970-Jan-01 00:01:37.442981]: Loading capacitor model settings for extruder 0
[1970-Jan-01 00:01:37.446430]: Have 1 valid ToolheadManager pointers, 0 is 0x1df730
[1970-Jan-01 00:01:37.585297]: setting driver address to 22
[1970-Jan-01 00:01:40.890807]: Init step: 0
[1970-Jan-01 00:01:40.941328]: Reset Toolhead Program State
[1970-Jan-01 00:01:40.942997]: Toolhead programmer: Resetting
[1970-Jan-01 00:01:40.944624]: done
[1970-Jan-01 00:01:42.051648]: Init step: 1
[1970-Jan-01 00:01:42.058754]: done
[1970-Jan-01 00:01:42.544160]: Init step: 2
[1970-Jan-01 00:01:42.545934]: done
[1970-Jan-01 00:01:43.046421]: Init step: 3
[1970-Jan-01 00:01:43.179601]: done
[1970-Jan-01 00:01:43.558476]: Init step: 4
[1970-Jan-01 00:01:43.591215]: done
[1970-Jan-01 00:01:44.071199]: Init step: 5
[1970-Jan-01 00:01:44.090437]: done
[1970-Jan-01 00:01:44.573719]: Init step: 5
[1970-Jan-01 00:01:44.675765]: done
[1970-Jan-01 00:01:45.075823]: Init step: 5
[1970-Jan-01 00:01:45.152157]: done
[1970-Jan-01 00:01:45.577783]: Init step: 5
[1970-Jan-01 00:01:45.579594]: done
[1970-Jan-01 00:01:46.100269]: Init step: 5
[1970-Jan-01 00:01:46.102375]: done
[1970-Jan-01 00:01:46.603261]: Init step: 5
[1970-Jan-01 00:01:46.706098]: done
[1970-Jan-01 00:01:47.105275]: Init step: 5
[1970-Jan-01 00:01:47.119245]: Toolhead 0: Packet 0x0: Calculated CRC: 0x62f5481b  Packet CRC: 0x0
[1970-Jan-01 00:01:47.121383]: Toolhead 0 : Toolhead Response Fail with comm_error: 1  Retry # : 1
[1970-Jan-01 00:01:47.123171]: done
[1970-Jan-01 00:01:47.607532]: Init step: 5
[1970-Jan-01 00:01:47.609302]: done
[1970-Jan-01 00:01:48.120240]: Init step: 5
[1970-Jan-01 00:01:48.122490]: done
[1970-Jan-01 00:01:48.611365]: Init step: 5
[1970-Jan-01 00:01:48.713444]: done
[1970-Jan-01 00:01:49.112964]: Init step: 5
[1970-Jan-01 00:01:49.121027]: Got valid API version 6 for Toolhead 0
[1970-Jan-01 00:01:49.127046]: done
[1970-Jan-01 00:01:49.737573]: Init step: 5
[1970-Jan-01 00:01:49.750466]: done
[1970-Jan-01 00:01:50.239576]: Init step: 5
[1970-Jan-01 00:01:50.351927]: done
[1970-Jan-01 00:01:50.741714]: Init step: 5
[1970-Jan-01 00:01:50.752335]: Toolhead 0 state error: 54
[1970-Jan-01 00:01:50.754162]: Toolhead 0: Toolhead has Firmware version 1.7,736
[1970-Jan-01 00:01:50.756038]:  Toolhead 0 initialized
[1970-Jan-01 00:01:50.757704]: done
[1970-Jan-01 00:01:51.243397]: Init step: 6
[1970-Jan-01 00:01:51.250702]: done
[1970-Jan-01 00:01:51.752353]: Init step: 7
[1970-Jan-01 00:01:51.754738]: done
[1970-Jan-01 00:01:52.280521]: PRU Event: PRU_INIT
[1970-Jan-01 00:01:53.270935]: bronx lowest mem space: 0x3b6 bytes
[1970-Jan-01 00:02:40.329472]: GetCachedToolUsageStats called
[1970-Jan-01 00:03:16.986574]: bronx lowest mem space: 0x3b2 bytes
[1970-Jan-01 00:04:56.700746]: TH0: 2 failures in last 93 packets (2.15054%)
[1970-Jan-01 00:04:56.702690]: Toolhead Abort
[1970-Jan-01 00:04:56.704496]: aborting pru with shutdown=true
[1970-Jan-01 00:04:56.707082]: Last sync period had (0,0,1068) buffer fulls due to suspend moves
[1970-Jan-01 00:04:56.708776]: Libstepper All Axis Abort
[1970-Jan-01 00:04:56.950335]: bronx lowest mem space: 0x3ae bytes
[1970-Jan-01 01:21:46.801473]: bronx lowest mem space: 0x39e bytes
[1970-Jan-01 02:07:09.977385]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 02:07:09.979296]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:07:14.232380]: bronx lowest mem space: 0x39a bytes
[1970-Jan-01 02:07:14.354449]: Toolhead 0 state error: 80
[1970-Jan-01 02:07:14.356310]: bronx lowest mem space: 0x392 bytes
[1970-Jan-01 02:07:14.358005]: Checking tool eeprom version
[1970-Jan-01 02:07:14.359634]: Commanding tool usage stat retrieve
[1970-Jan-01 02:07:14.361779]: New tool uid 0x16d51 attached, updating info cache
[1970-Jan-01 02:07:14.393192]: Last sync period had (0,0,44757) buffer fulls due to suspend moves
[1970-Jan-01 02:07:14.395114]: Syncing turned false
[1970-Jan-01 02:07:14.396863]: Toolhead Abort
[1970-Jan-01 02:07:14.398569]: aborting pru with shutdown=true
[1970-Jan-01 02:07:14.411566]: Last sync period had (0,0,44757) buffer fulls due to suspend moves
[1970-Jan-01 02:07:14.413492]: Libstepper All Axis Abort
[1970-Jan-01 02:07:14.415451]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 02:07:14.417178]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:07:14.419030]: Commanding tool usage stat retrieve
[1970-Jan-01 02:07:14.470952]: Commanding tool usage stat retrieve
[1970-Jan-01 02:07:14.503013]: Commanding tool usage stat retrieve
[1970-Jan-01 02:07:14.523834]: bronx lowest mem space: 0x37e bytes
[1970-Jan-01 02:07:14.549156]: Commanding tool usage stat retrieve
[1970-Jan-01 02:07:17.309149]: Raw usage stats: retract 708ct, extrusion 278170 steps, 1255 seconds, refurbed 0 times
[1970-Jan-01 02:07:17.311180]: Steps/mm not configured, tool usage logging will be wrong!
[1970-Jan-01 02:07:18.820185]: Raw usage stats: retract 708ct, extrusion 278170 steps, 1255 seconds, refurbed 0 times
[1970-Jan-01 02:07:18.822770]: Steps/mm not configured, tool usage logging will be wrong!
[1970-Jan-01 02:07:20.331040]: Raw usage stats: retract 708ct, extrusion 278170 steps, 1255 seconds, refurbed 0 times
[1970-Jan-01 02:07:20.332936]: Steps/mm not configured, tool usage logging will be wrong!
[1970-Jan-01 02:07:21.841107]: Raw usage stats: retract 708ct, extrusion 278170 steps, 1255 seconds, refurbed 0 times
[1970-Jan-01 02:07:21.842906]: Steps/mm not configured, tool usage logging will be wrong!
[1970-Jan-01 02:07:25.863113]: bronx lowest mem space: 0x376 bytes
[1970-Jan-01 02:07:48.426597]: bronx lowest mem space: 0x372 bytes
[1970-Jan-01 02:08:28.429840]: Heater manager Set Target Temperature to 180, index 0
[1970-Jan-01 02:08:28.432086]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:08:28.636525]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 02:08:29.036686]: bronx lowest mem space: 0x352 bytes
[1970-Jan-01 02:10:48.698652]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false
[1970-Jan-01 02:10:48.700880]: Load Sense Limit Method: 1
[1970-Jan-01 02:10:48.703724]: Last sync period had (0,0,55857) buffer fulls due to suspend moves
[1970-Jan-01 02:10:48.705504]: Libstepper All Axis Abort
[1970-Jan-01 02:10:50.717530]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:10:52.200327]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-01 02:10:52.202181]: Toolhead Abort
[1970-Jan-01 02:10:52.204023]: aborting pru with shutdown=true
[1970-Jan-01 02:10:52.207139]: Last sync period had (0,0,56121) buffer fulls due to suspend moves
[1970-Jan-01 02:10:52.208909]: Libstepper All Axis Abort
[1970-Jan-01 02:10:52.236474]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-01 02:10:52.265198]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-01 02:10:52.311638]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-01 02:10:54.216819]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false
[1970-Jan-01 02:10:54.218787]: Load Sense Limit Method: 0
[1970-Jan-01 02:10:54.221698]: Last sync period had (0,0,56283) buffer fulls due to suspend moves
[1970-Jan-01 02:10:54.223793]: Libstepper All Axis Abort
[1970-Jan-01 02:10:55.298951]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:10:59.462261]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:11:03.717839]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:11:07.925760]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:11:08.274192]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-01 02:11:08.276024]: Toolhead Abort
[1970-Jan-01 02:11:08.277806]: aborting pru with shutdown=true
[1970-Jan-01 02:11:08.291601]: Last sync period had (0,0,57348) buffer fulls due to suspend moves
[1970-Jan-01 02:11:08.293503]: Libstepper All Axis Abort
[1970-Jan-01 02:11:08.336589]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-01 02:11:08.384944]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-01 02:11:08.440803]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-01 02:11:08.478575]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-01 02:11:08.983970]: HOME: wait for buffer empty
[1970-Jan-01 02:11:09.051565]: HOME: wait for buffer empty
[1970-Jan-01 02:11:09.098685]: HOME: wait for buffer empty
[1970-Jan-01 02:11:09.128218]: HOME: wait for buffer empty
[1970-Jan-01 02:11:09.156213]: HOME: wait for buffer empty
[1970-Jan-01 02:11:09.187402]: HOME: wait for buffer empty
[1970-Jan-01 02:11:09.237259]: HOME: wait for buffer empty
[1970-Jan-01 02:11:09.263007]: HOME: wait for buffer empty
[1970-Jan-01 02:11:09.343528]: HOME: wait for buffer empty
[1970-Jan-01 02:11:09.410612]: HOME: wait for buffer empty
[1970-Jan-01 02:11:09.446950]: HOME: wait for buffer empty
[1970-Jan-01 02:11:09.486864]: HOME: wait for buffer empty
[1970-Jan-01 02:11:09.512554]: HOME: wait for buffer empty
[1970-Jan-01 02:11:09.581126]: HOME: wait for buffer empty
[1970-Jan-01 02:11:09.623534]: HOME: wait for buffer empty
[1970-Jan-01 02:11:09.648089]: HOME: wait for buffer empty
[1970-Jan-01 02:11:09.689873]: HOME: wait for buffer empty
[1970-Jan-01 02:11:09.723099]: HOME: wait for buffer empty
[1970-Jan-01 02:11:09.764187]: HOME: wait for buffer empty
[1970-Jan-01 02:11:09.804323]: HOME: wait for buffer empty
[1970-Jan-01 02:11:09.837413]: HOME: wait for buffer empty
[1970-Jan-01 02:11:09.865918]: HOME: wait for buffer empty
[1970-Jan-01 02:11:09.894346]: HOME: wait for buffer empty
[1970-Jan-01 02:11:09.927077]: HOME: wait for buffer empty
[1970-Jan-01 02:11:09.977179]: HOME: wait for buffer empty
[1970-Jan-01 02:11:10.011721]: HOME: wait for buffer empty
[1970-Jan-01 02:11:10.039588]: HOME: wait for buffer empty
[1970-Jan-01 02:11:10.118366]: HOME: wait for buffer empty
[1970-Jan-01 02:11:10.146260]: HOME: wait for buffer empty
[1970-Jan-01 02:11:10.181723]: HOME: wait for buffer empty
[1970-Jan-01 02:11:10.226285]: HOME: wait for buffer empty
[1970-Jan-01 02:11:10.260331]: HOME: wait for buffer empty
[1970-Jan-01 02:11:10.296552]: HOME: wait for buffer empty
[1970-Jan-01 02:11:10.345598]: HOME: wait for buffer empty
[1970-Jan-01 02:11:10.379514]: HOME: wait for buffer empty
[1970-Jan-01 02:11:10.403455]: HOME: wait for buffer empty
[1970-Jan-01 02:11:10.428584]: HOME: wait for buffer empty
[1970-Jan-01 02:11:10.468811]: HOME: wait for buffer empty
[1970-Jan-01 02:11:10.513312]: HOME: wait for buffer empty
[1970-Jan-01 02:11:10.547537]: HOME: wait for buffer empty
[1970-Jan-01 02:11:10.572607]: HOME: wait for buffer empty
[1970-Jan-01 02:11:10.643421]: HOME: wait for buffer empty
[1970-Jan-01 02:11:10.679452]: HOME: wait for buffer empty
[1970-Jan-01 02:11:10.703153]: HOME: wait for buffer empty
[1970-Jan-01 02:11:10.746271]: HOME: wait for buffer empty
[1970-Jan-01 02:11:10.791910]: HOME: wait for buffer empty
[1970-Jan-01 02:11:10.857695]: HOME: wait for buffer empty
[1970-Jan-01 02:11:10.917993]: HOME: wait for buffer empty
[1970-Jan-01 02:11:10.957234]: HOME: wait for buffer empty
[1970-Jan-01 02:11:10.996940]: HOME: wait for buffer empty
[1970-Jan-01 02:11:11.021140]: HOME: wait for buffer empty
[1970-Jan-01 02:11:11.065403]: HOME: wait for buffer empty
[1970-Jan-01 02:11:11.101506]: HOME: wait for buffer empty
[1970-Jan-01 02:11:11.131741]: HOME: wait for buffer empty
[1970-Jan-01 02:11:11.191415]: HOME: wait for buffer empty
[1970-Jan-01 02:11:11.242649]: HOME: axis 2, speed 8, flip dir false, sp true, blocking false
[1970-Jan-01 02:11:12.803233]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:11:16.466385]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:11:20.180427]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:11:23.800387]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:11:27.636805]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:11:31.552176]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:11:32.803704]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-01 02:11:32.805665]: Toolhead Abort
[1970-Jan-01 02:11:32.807376]: aborting pru with shutdown=false
[1970-Jan-01 02:11:32.810273]: Last sync period had (0,0,59379) buffer fulls due to suspend moves
[1970-Jan-01 02:11:32.812176]: Libstepper All Axis Abort
[1970-Jan-01 02:11:32.892737]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-01 02:11:35.125378]: GAP: Query->Await
[1970-Jan-01 02:11:35.162705]: GAP: Await
[1970-Jan-01 02:11:35.202493]: GAP: Await
[1970-Jan-01 02:11:35.224429]: TH0: Retreived step position 11731215
[1970-Jan-01 02:11:35.240210]: wait for PRU status in get position
[1970-Jan-01 02:11:35.243259]: wait for PRU status in get position
[1970-Jan-01 02:11:35.244903]: GAP: Await->Done(Query)
[1970-Jan-01 02:11:35.278758]: Changing HES sample rate. Commanded: 30Hz; clamped to 30.7143Hz (215/7)
[1970-Jan-01 02:11:35.363190]: Syncing turned true
[1970-Jan-01 02:11:35.374862]: PRU Event: PRU_SYNC_ON(7)
[1970-Jan-01 02:11:35.550219]: Toolhead 0 commands idle
[1970-Jan-01 02:11:35.681943]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-01 02:11:35.814334]: Toolhead 0  ADC Error: 1
[1970-Jan-01 02:11:35.892843]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-01 02:11:35.895438]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-01 02:11:35.897139]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-01 02:11:35.898814]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-01 02:11:35.902280]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-01 02:11:35.904004]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-01 02:11:36.115159]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:11:39.822086]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:11:42.974830]: Buffer stall ongoing: 903
[1970-Jan-01 02:11:43.020953]: Buffer stall ongoing: 10707
[1970-Jan-01 02:11:43.051454]: Buffer stall ongoing: 17157
[1970-Jan-01 02:11:43.078243]: Buffer stall ongoing: 22833
[1970-Jan-01 02:11:43.116324]: Buffer stall ongoing: 30831
[1970-Jan-01 02:11:43.167985]: Buffer stall ongoing: 41796
[1970-Jan-01 02:11:43.184388]: Last sync period had (0,0,579) buffer fulls due to suspend moves
[1970-Jan-01 02:11:43.186314]: Syncing turned false
[1970-Jan-01 02:11:43.205587]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-01 02:11:43.207354]: Buffer stall ongoing: 45666
[1970-Jan-01 02:11:44.300934]: HES logged: false
[1970-Jan-01 02:11:44.359653]: HES logged: false
[1970-Jan-01 02:11:44.404781]: HES logged: false
[1970-Jan-01 02:11:44.435413]: HES logged: false
[1970-Jan-01 02:11:44.478063]: HES logged: false
[1970-Jan-01 02:11:44.521451]: HES logged: false
[1970-Jan-01 02:11:44.553760]: HES logged: false
[1970-Jan-01 02:11:44.589714]: HES logged: false
[1970-Jan-01 02:11:44.616196]: HES logged: false
[1970-Jan-01 02:11:44.657255]: HES logged: false
[1970-Jan-01 02:11:44.698460]: HES logged: false
[1970-Jan-01 02:11:44.739064]: HES logged: false
[1970-Jan-01 02:11:44.769223]: HES logged: false
[1970-Jan-01 02:11:44.817402]: HES logged: false
[1970-Jan-01 02:11:44.843779]: HES logged: false
[1970-Jan-01 02:11:44.894861]: HES logged: false
[1970-Jan-01 02:11:45.006356]: HES logged: false
[1970-Jan-01 02:11:45.070225]: HES logged: false
[1970-Jan-01 02:11:45.109488]: HES logged: false
[1970-Jan-01 02:11:45.138979]: HES logged: false
[1970-Jan-01 02:11:45.172692]: HES logged: false
[1970-Jan-01 02:11:45.229364]: HES logged: false
[1970-Jan-01 02:11:45.272513]: HES logged: false
[1970-Jan-01 02:11:45.314303]: HES logged: false
[1970-Jan-01 02:11:45.358260]: HES logged: false
[1970-Jan-01 02:11:45.388204]: HES logged: false
[1970-Jan-01 02:11:45.466242]: HES logged: false
[1970-Jan-01 02:11:45.503400]: HES logged: false
[1970-Jan-01 02:11:45.529858]: HES logged: false
[1970-Jan-01 02:11:45.579379]: HES logged: false
[1970-Jan-01 02:11:45.617421]: HES logged: false
[1970-Jan-01 02:11:45.651959]: HES logged: false
[1970-Jan-01 02:11:45.691165]: HES logged: false
[1970-Jan-01 02:11:45.745206]: HES logged: false
[1970-Jan-01 02:11:45.772763]: HES logged: false
[1970-Jan-01 02:11:45.808683]: HES logged: false
[1970-Jan-01 02:11:45.852245]: HES logged: false
[1970-Jan-01 02:11:45.884107]: HES logged: false
[1970-Jan-01 02:11:45.912189]: HES logged: false
[1970-Jan-01 02:11:45.952189]: HES logged: false
[1970-Jan-01 02:11:46.035026]: HES logged: false
[1970-Jan-01 02:11:46.061961]: HES logged: false
[1970-Jan-01 02:11:46.093423]: HES logged: false
[1970-Jan-01 02:11:46.143793]: HES logged: false
[1970-Jan-01 02:11:46.171343]: HES logged: false
[1970-Jan-01 02:11:46.205793]: HES logged: false
[1970-Jan-01 02:11:46.254090]: HES logged: false
[1970-Jan-01 02:11:46.286162]: HES logged: false
[1970-Jan-01 02:11:46.311798]: HES logged: false
[1970-Jan-01 02:11:46.351814]: HES logged: false
[1970-Jan-01 02:11:46.404023]: HES logged: false
[1970-Jan-01 02:11:46.429330]: HES logged: false
[1970-Jan-01 02:11:46.528094]: HES logged: false
[1970-Jan-01 02:11:46.609024]: HES logged: false
[1970-Jan-01 02:11:46.644937]: HES logged: false
[1970-Jan-01 02:11:46.672432]: HES logged: false
[1970-Jan-01 02:11:46.716286]: HES logged: false
[1970-Jan-01 02:11:46.754144]: HES logged: false
[1970-Jan-01 02:11:46.791801]: HES logged: false
[1970-Jan-01 02:11:46.822989]: HES logged: false
[1970-Jan-01 02:11:46.864715]: HES logged: false
[1970-Jan-01 02:11:46.900927]: HES logged: false
[1970-Jan-01 02:11:46.925977]: HES logged: false
[1970-Jan-01 02:11:46.957205]: HES logged: false
[1970-Jan-01 02:11:47.014905]: HES logged: true
[1970-Jan-01 02:11:48.461002]: Toolhead 0  ADC Error: 0
[1970-Jan-01 02:11:48.941677]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:11:52.524632]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:11:56.097545]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:11:59.835736]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:12:03.614969]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:12:04.242703]: Toolhead Abort
[1970-Jan-01 02:12:04.244787]: aborting pru with shutdown=true
[1970-Jan-01 02:12:04.248638]: CLEAR BUFFER FAIL! in libstepper::Abort()
[1970-Jan-01 02:12:04.251559]: Last sync period had (0,0,2271) buffer fulls due to suspend moves
[1970-Jan-01 02:12:04.253505]: Libstepper All Axis Abort
[1970-Jan-01 02:12:04.396156]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 02:12:04.401499]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:13:59.377575]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-01 02:13:59.379325]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:14:00.784727]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 02:16:05.729329]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:16:08.761073]: Toolhead 0 state error: 0
[1970-Jan-01 02:16:10.360844]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:16:15.130952]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:16:19.847400]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:16:24.361877]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:16:28.647253]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:16:32.976324]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:16:37.076071]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:16:43.031953]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:16:47.362769]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:16:48.089969]:  wait for axis 0 full: false offset: 90 l3map offset:    90 status: 1 position -9743 status count 1001
[1970-Jan-01 02:16:52.552684]: Raw HES proceeding
[1970-Jan-01 02:16:52.585372]: Got raw val 9147, saturated: false
[1970-Jan-01 02:16:52.620412]: Returning HES
[1970-Jan-01 02:16:52.622096]: Sending back val 9147, saturated false
[1970-Jan-01 02:16:52.723227]: Toolhead Abort
[1970-Jan-01 02:16:52.725742]: aborting pru with shutdown=true
[1970-Jan-01 02:16:52.740852]: Last sync period had (0,0,14727) buffer fulls due to suspend moves
[1970-Jan-01 02:16:52.742689]: Libstepper All Axis Abort
[1970-Jan-01 02:17:00.626390]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 02:17:00.628896]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:17:21.970533]: Heater manager Set Target Temperature to 180, index 0
[1970-Jan-01 02:17:21.973607]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:17:22.962566]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false
[1970-Jan-01 02:17:22.965420]: Load Sense Limit Method: 1
[1970-Jan-01 02:17:22.980843]: Last sync period had (0,0,14973) buffer fulls due to suspend moves
[1970-Jan-01 02:17:22.982717]: Libstepper All Axis Abort
[1970-Jan-01 02:17:24.738607]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:17:29.546169]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-01 02:17:29.548059]: Toolhead Abort
[1970-Jan-01 02:17:29.549878]: aborting pru with shutdown=true
[1970-Jan-01 02:17:29.552948]: Last sync period had (0,0,15306) buffer fulls due to suspend moves
[1970-Jan-01 02:17:29.554774]: Libstepper All Axis Abort
[1970-Jan-01 02:17:29.588647]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-01 02:17:31.011802]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:17:31.419812]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false
[1970-Jan-01 02:17:31.422248]: Load Sense Limit Method: 0
[1970-Jan-01 02:17:31.425058]: Last sync period had (0,0,15417) buffer fulls due to suspend moves
[1970-Jan-01 02:17:31.426989]: Libstepper All Axis Abort
[1970-Jan-01 02:17:36.411556]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:17:43.211518]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:17:45.531792]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-01 02:17:45.533641]: Toolhead Abort
[1970-Jan-01 02:17:45.535393]: aborting pru with shutdown=true
[1970-Jan-01 02:17:45.538240]: Last sync period had (0,0,16182) buffer fulls due to suspend moves
[1970-Jan-01 02:17:45.540281]: Libstepper All Axis Abort
[1970-Jan-01 02:17:45.593395]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-01 02:17:48.374299]: HOME: axis 2, speed 8, flip dir false, sp true, blocking false
[1970-Jan-01 02:17:49.399253]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:17:53.865029]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:17:58.421901]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:18:03.085330]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:18:08.154611]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:18:09.517826]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-01 02:18:09.519775]: Toolhead Abort
[1970-Jan-01 02:18:09.531805]: aborting pru with shutdown=false
[1970-Jan-01 02:18:09.540802]: Last sync period had (0,0,17799) buffer fulls due to suspend moves
[1970-Jan-01 02:18:09.542647]: Libstepper All Axis Abort
[1970-Jan-01 02:18:09.613729]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-01 02:18:10.095938]: HOME: axis 2, speed 0.5, flip dir false, sp true, blocking true
[1970-Jan-01 02:18:10.505514]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:18:10.768688]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:18:11.034350]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:18:11.309778]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:18:11.572889]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:18:11.839011]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:18:12.115912]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:18:12.381851]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:18:12.652312]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:18:12.936119]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:18:13.033422]:  wait for axis 0 full: false offset: 108 l3map offset:    126 status: 1 position -4235 status count 1001
[1970-Jan-01 02:18:13.211095]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:18:13.475335]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:18:13.495099]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-01 02:18:13.496978]: Toolhead Abort
[1970-Jan-01 02:18:13.498838]: aborting pru with shutdown=false
[1970-Jan-01 02:18:13.501801]: Last sync period had (0,0,17844) buffer fulls due to suspend moves
[1970-Jan-01 02:18:13.503880]: Libstepper All Axis Abort
[1970-Jan-01 02:18:13.570207]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-01 02:18:13.813123]: GAP: Query->Await
[1970-Jan-01 02:18:13.826592]: TH0: Retreived step position 11665679
[1970-Jan-01 02:18:13.853515]: wait for PRU status in get position
[1970-Jan-01 02:18:13.856546]: GAP: Await->Done(Query)
[1970-Jan-01 02:18:14.089930]: Heater manager Set Target Temperature to 180, index 0
[1970-Jan-01 02:18:14.091956]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:18:15.077884]: Expecting 28083.6 steps extruded this print from 258.716 mm of plastic
[1970-Jan-01 02:18:15.223868]: Heater manager Set Target Temperature to 200, index 0
[1970-Jan-01 02:18:15.226819]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:18:15.336737]: Expected packet id: 0x79, Got packet id: 0x0, Full packet: 
0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x21,0x0,0xb2,0x0,0xf,0x87,0xb0,0x1,

[1970-Jan-01 02:18:15.338656]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:18:15.352769]: Toolhead 0: Unsupported Command
[1970-Jan-01 02:18:15.354577]: bronx lowest mem space: 0x34e bytes
[1970-Jan-01 02:18:15.394540]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-01 02:19:15.471898]: Expend Buffer: false
[1970-Jan-01 02:19:15.571645]: Syncing turned true
[1970-Jan-01 02:19:15.661618]: PRU Event: PRU_SYNC_ON(7)
[1970-Jan-01 02:19:15.663490]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-01 02:19:15.928508]: Toolhead 0  ADC Error: 1
[1970-Jan-01 02:19:17.085374]: Expected packet id: 0x1c, Got packet id: 0x1b, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xc9,0x0,0xf,0x92,0x49,0x1,0x0,0xc8,0x0,0x1,0x6d,0x51,0x3,0x4e,0x1,0x0,0x0,0x0,0x0,0x0,0x66,0x0,0x1b,0x84,0xf6,0x69,0xa6,

[1970-Jan-01 02:19:17.087337]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:19:17.120301]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-01 02:19:17.122707]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-01 02:19:17.124438]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-01 02:19:17.131890]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-01 02:19:17.133594]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-01 02:19:17.135439]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-01 02:19:41.060384]: Expected packet id: 0xab, Got packet id: 0xaa, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xcb,0x0,0xf,0xa9,0xa1,0x1,0x0,0xc8,0x0,0x1,0x6d,0x51,0x3,0x4e,0x1,0x0,0x0,0x0,0x0,0x5,0xc4,0x0,0xaa,0x8,0x50,0x7f,0xd6,

[1970-Jan-01 02:19:41.062249]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:19:44.354366]: Expected packet id: 0x5f, Got packet id: 0x5e, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xca,0x0,0xf,0xac,0xc0,0x1,0x0,0xc8,0x0,0x1,0x6d,0x51,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x52,0x0,0x5e,0xbc,0xfd,0x5d,0x92,

[1970-Jan-01 02:19:44.356253]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:19:57.246343]: Expected packet id: 0xec, Got packet id: 0xc8, Full packet: 
0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xc3,0x0,0xf,0xb7,0x98,0x1,0x0,0xc8,0x0,0x1,0x6d,0x51,

[1970-Jan-01 02:19:57.248846]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:19:57.648012]: Expected packet id: 0x26, Got packet id: 0x25, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xc3,0x0,0xf,0xb8,0x0,0x1,0x0,0xc8,0x0,0x1,0x6d,0x51,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0xce,0x0,0x25,0x6d,0xdb,0x69,0x44,

[1970-Jan-01 02:19:57.649894]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:20:02.747737]: Expected packet id: 0xa, Got packet id: 0x9, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xc2,0x0,0xf,0xbc,0x5d,0x1,0x0,0xc8,0x0,0x1,0x6d,0x51,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x1,0x35,0x0,0x9,0xe2,0xd1,0xb8,0x63,

[1970-Jan-01 02:20:02.749696]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:20:09.836058]: Expected packet id: 0x6f, Got packet id: 0x6e, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xc3,0x0,0xf,0xc1,0xe2,0x1,0x0,0xc8,0x0,0x1,0x6d,0x51,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x4d,0x0,0x6e,0xdd,0xf1,0xa6,0xd4,

[1970-Jan-01 02:20:09.838040]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:20:17.099483]: Expected packet id: 0xc, Got packet id: 0xb, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xc4,0x0,0xf,0xc9,0x73,0x1,0x0,0xc8,0x0,0x1,0x6d,0x51,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x95,0x0,0xb,0xd6,0x60,0x7a,0x95,

[1970-Jan-01 02:20:17.101712]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:20:19.472415]: Expected packet id: 0x7d, Got packet id: 0x7c, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xc4,0x0,0xf,0xcb,0xf1,0x1,0x0,0xc8,0x0,0x1,0x6d,0x51,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x65,0x0,0x7c,0x89,0xae,0x45,0xf7,

[1970-Jan-01 02:20:19.474274]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:20:19.751927]: Expected packet id: 0x8d, Got packet id: 0x8c, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xc4,0x0,0xf,0xcc,0x42,0x1,0x0,0xc8,0x0,0x1,0x6d,0x51,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x76,0x0,0x8c,0xc7,0xb6,0x1f,0xb6,

[1970-Jan-01 02:20:19.756557]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:20:23.545285]: Expected packet id: 0x49, Got packet id: 0x48, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xc5,0x0,0xf,0xcf,0xa5,0x1,0x0,0xc8,0x0,0x1,0x6d,0x51,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x84,0x0,0x48,0x62,0x86,0xd0,0x98,

[1970-Jan-01 02:20:23.547133]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:20:23.557106]: Expected packet id: 0x49, Got packet id: 0x48, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xc5,0x0,0xf,0xcf,0xa5,0x1,0x0,0xc8,0x0,0x1,0x6d,0x51,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x84,0x0,0x48,0x62,0x86,0xd0,0x98,

[1970-Jan-01 02:20:23.559117]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 2
[1970-Jan-01 02:20:23.624519]: Expected packet id: 0x59, Got packet id: 0x58, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xc5,0x0,0xf,0xcf,0xbc,0x1,0x0,0xc8,0x0,0x1,0x6d,0x51,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0xb8,0x0,0x58,0x9f,0x41,0x7a,0xdf,

[1970-Jan-01 02:20:23.626417]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:20:28.436194]: Expected packet id: 0x9c, Got packet id: 0x9b, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xc5,0x0,0xf,0xd4,0xf7,0x1,0x0,0xc8,0x0,0x1,0x6d,0x51,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x2,0xc5,0x0,0x9b,0x5e,0x47,0x9d,0x4,

[1970-Jan-01 02:20:28.438181]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:20:28.473278]: Expected packet id: 0xa3, Got packet id: 0x1, Full packet: 
0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xc5,0x0,0xf,0xd4,0xfc,0x1,0x0,0xc8,0x0,0x1,

[1970-Jan-01 02:20:28.475126]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:20:32.241738]: Expected packet id: 0x4e, Got packet id: 0x4d, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xc6,0x0,0xf,0xd8,0xe7,0x1,0x0,0xc8,0x0,0x1,0x6d,0x51,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x22,0x0,0x4d,0x81,0xc2,0xdb,0x97,

[1970-Jan-01 02:20:32.243638]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:20:53.817179]: Expected packet id: 0x2a, Got packet id: 0x29, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xc7,0x0,0xf,0xe2,0x36,0x1,0x0,0xc8,0x0,0x1,0x6d,0x51,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x1,0x1a,0x0,0x29,0x7c,0x3c,0x93,0x75,

[1970-Jan-01 02:20:53.819059]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:21:07.034367]: Expected packet id: 0x69, Got packet id: 0x68, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xc6,0x0,0xf,0xe6,0x7d,0x1,0x0,0xc8,0x0,0x1,0x6d,0x51,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x2,0x25,0x0,0x68,0x72,0x4,0x99,0xb9,

[1970-Jan-01 02:21:07.036412]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:21:11.649123]: Expected packet id: 0x19, Got packet id: 0x18, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xc7,0x0,0xf,0xe7,0xc6,0x1,0x0,0xc8,0x0,0x1,0x6d,0x51,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x1c,0x0,0x18,0x58,0x86,0x21,0xe1,

[1970-Jan-01 02:21:11.651219]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:21:11.716888]: Expected packet id: 0x28, Got packet id: 0x27, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xc7,0x0,0xf,0xe7,0xd1,0x1,0x0,0xc8,0x0,0x1,0x6d,0x51,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x3a,0x0,0x27,0x8b,0x5c,0x86,0xcf,

[1970-Jan-01 02:21:11.718924]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:21:20.648736]: Expected packet id: 0x64, Got packet id: 0x63, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xc8,0x0,0xf,0xe9,0xe4,0x1,0x0,0xc8,0x0,0x1,0x6d,0x51,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x3,0x87,0x0,0x63,0x41,0x6a,0x91,0xa0,

[1970-Jan-01 02:21:20.650851]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:22:07.823695]: Expected packet id: 0xfc, Got packet id: 0xfb, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xc6,0x0,0xf,0xf2,0xc5,0x1,0x0,0xc8,0x0,0x1,0x6d,0x51,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x1,0xa4,0x0,0xfb,0xe1,0x1d,0x4d,0xa9,

[1970-Jan-01 02:22:07.825617]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:22:19.220415]: Expected packet id: 0x4d, Got packet id: 0x4c, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xc4,0x0,0xf,0xf4,0xcb,0x1,0x0,0xc8,0x0,0x1,0x6d,0x51,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x72,0x0,0x4c,0x78,0x68,0x1d,0xcb,

[1970-Jan-01 02:22:19.222516]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:22:31.414479]: Expected packet id: 0x7d, Got packet id: 0xf6, Full packet: 
0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xc6,0x0,0xf,0xf6,0xfe,0x1,0x0,0xc8,

[1970-Jan-01 02:22:31.416396]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:22:37.821158]: Expected packet id: 0x8e, Got packet id: 0x8d, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xc8,0x0,0xf,0xf8,0x64,0x1,0x0,0xc8,0x0,0x1,0x6d,0x51,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0x5e,0x0,0x8d,0x89,0x85,0xb7,0xbd,

[1970-Jan-01 02:22:37.823901]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-01 02:23:05.212331]: Expend Buffer: true
[1970-Jan-01 02:23:05.474591]: Toolhead 0 commands idle
[1970-Jan-01 02:23:08.009646]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-01 02:23:14.999154]: Steps overrun! last 65534 and just got 4
[1970-Jan-01 02:23:15.001125]: calculated 5
[1970-Jan-01 02:23:17.040867]: Buffer stall ongoing: 7869
[1970-Jan-01 02:23:17.151489]: Buffer stall ongoing: 30960
[1970-Jan-01 02:23:17.188578]: Buffer stall ongoing: 39474
[1970-Jan-01 02:23:17.251104]: Buffer stall ongoing: 52632
[1970-Jan-01 02:23:17.268992]: Last sync period had (0,12537,37329) buffer fulls due to suspend moves
[1970-Jan-01 02:23:17.271059]: Syncing turned false
[1970-Jan-01 02:23:17.354816]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-01 02:23:17.356700]: Buffer stall ongoing: 56889
[1970-Jan-01 02:23:19.053151]: Toolhead 0  ADC Error: 0
[1970-Jan-01 02:23:19.992667]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:23:26.806588]: libstepper: true toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-01 02:23:31.302863]: Last sync period had (0,12537,37941) buffer fulls due to suspend moves
[1970-Jan-01 02:23:31.304697]: Syncing turned false
[1970-Jan-01 02:23:31.306586]: TH0: 212 failures in last 13309 packets (1.59291%)
[1970-Jan-01 02:23:31.308512]: Toolhead Abort
[1970-Jan-01 02:23:31.330462]: aborting pru with shutdown=true
[1970-Jan-01 02:23:31.333378]: Last sync period had (0,12537,37941) buffer fulls due to suspend moves
[1970-Jan-01 02:23:31.335197]: Libstepper All Axis Abort
[1970-Jan-01 02:23:31.336812]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 02:23:31.338637]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:23:31.467285]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-01 02:23:31.469076]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-01 02:23:31.650352]: Commanding stats update: Retract count: 789
[1970-Jan-01 02:23:31.652245]: Toolhead 0 marked as possibly blocking!
[1970-Jan-01 02:23:31.892674]: Toolhead 0 done blocking!
[1970-Jan-01 02:23:32.056909]: GetToolUsageStats called in machine  state 0
[1970-Jan-01 02:23:32.071977]: Commanding tool usage stat retrieve
[1970-Jan-01 02:23:32.073673]: GetToolUsageState: Proceeds to 1
[1970-Jan-01 02:23:32.075456]: GetToolUsagState: Error from retrieve: 0x10a
[1970-Jan-01 02:23:32.118324]: Raw usage stats: retract 1497ct, extrusion 345983 steps, 1506 seconds, refurbed 0 times
[1970-Jan-01 02:23:32.207687]: GetToolUsageStats called in machine  state 1
[1970-Jan-01 02:23:32.222745]: VerifyToolUsageStatsRetrieved: Done
[1970-Jan-01 02:23:32.224388]: GetToolUsageState: Proceeds to 2
[1970-Jan-01 02:23:32.281282]: GetToolUsageStats called in machine  state 2
[1970-Jan-01 02:23:32.283034]: GetToolUsageState: Done, resets
[1970-Jan-04 10:58:01.860537]: TH0: 1 failures in last 65536 packets (0.00152588%)
[1970-Jan-13 23:12:15.021475]: TH0: 1 failures in last 65536 packets (0.00152588%)
[1970-Jan-14 19:04:07.486410]: Heater manager Set Target Temperature to 180, index 0
[1970-Jan-14 19:04:07.488256]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-14 19:09:27.781766]: Toolhead 0 state error: 56
[1970-Jan-14 19:09:29.800966]: Toolhead 0 state error: 0
[1970-Jan-15 02:17:26.120465]: Heater manager Set Target Temperature to 180, index 0
[1970-Jan-15 02:17:26.123385]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-15 02:17:27.314601]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false
[1970-Jan-15 02:17:27.335633]: Load Sense Limit Method: 1
[1970-Jan-15 02:17:27.348340]: Last sync period had (0,12537,53641065) buffer fulls due to suspend moves
[1970-Jan-15 02:17:27.375748]: Libstepper All Axis Abort
[1970-Jan-15 02:17:29.944452]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-15 02:17:33.994779]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-15 02:17:33.996621]: Toolhead Abort
[1970-Jan-15 02:17:33.998419]: aborting pru with shutdown=true
[1970-Jan-15 02:17:34.029406]: Last sync period had (0,12537,53641368) buffer fulls due to suspend moves
[1970-Jan-15 02:17:34.031428]: Libstepper All Axis Abort
[1970-Jan-15 02:17:34.083604]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-15 02:17:35.997604]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false
[1970-Jan-15 02:17:35.999614]: Load Sense Limit Method: 0
[1970-Jan-15 02:17:36.002610]: Last sync period had (0,12537,53641461) buffer fulls due to suspend moves
[1970-Jan-15 02:17:36.004546]: Libstepper All Axis Abort
[1970-Jan-15 02:17:37.739332]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-15 02:17:45.033331]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-15 02:17:50.131684]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-15 02:17:50.134244]: Toolhead Abort
[1970-Jan-15 02:17:50.135984]: aborting pru with shutdown=true
[1970-Jan-15 02:17:50.151075]: Last sync period had (0,12537,53642106) buffer fulls due to suspend moves
[1970-Jan-15 02:17:50.152872]: Libstepper All Axis Abort
[1970-Jan-15 02:17:50.287294]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-15 02:17:52.894527]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-15 02:17:53.164701]: HOME: axis 2, speed 8, flip dir false, sp true, blocking false
[1970-Jan-15 02:17:59.074355]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-15 02:18:05.200303]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-15 02:18:11.246511]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-15 02:18:14.798239]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-15 02:18:14.820318]: Toolhead Abort
[1970-Jan-15 02:18:14.822110]: aborting pru with shutdown=false
[1970-Jan-15 02:18:14.825594]: Last sync period had (0,12537,53643324) buffer fulls due to suspend moves
[1970-Jan-15 02:18:14.827505]: Libstepper All Axis Abort
[1970-Jan-15 02:18:14.920262]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-15 02:18:15.399710]: HOME: axis 2, speed 0.5, flip dir false, sp true, blocking true
[1970-Jan-15 02:18:15.842343]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-15 02:18:16.155534]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-15 02:18:16.446438]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-15 02:18:16.736766]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-15 02:18:17.014824]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-15 02:18:17.327958]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-15 02:18:17.626946]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-15 02:18:17.915894]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-15 02:18:17.935451]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-15 02:18:17.937393]: Toolhead Abort
[1970-Jan-15 02:18:17.939107]: aborting pru with shutdown=false
[1970-Jan-15 02:18:17.942683]: Last sync period had (0,12537,53643363) buffer fulls due to suspend moves
[1970-Jan-15 02:18:17.944460]: Libstepper All Axis Abort
[1970-Jan-15 02:18:18.021756]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-15 02:18:18.317375]: GAP: Query->Await
[1970-Jan-15 02:18:18.334166]: TH0: Retreived step position 5636367
[1970-Jan-15 02:18:18.363364]: wait for PRU status in get position
[1970-Jan-15 02:18:18.365183]: wait for PRU status in get position
[1970-Jan-15 02:18:18.366812]: GAP: Await->Done(Query)
[1970-Jan-15 02:18:18.621098]: Heater manager Set Target Temperature to 180, index 0
[1970-Jan-15 02:18:18.622913]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-15 02:18:20.166301]: Expecting 520130 steps extruded this print from 4791.62 mm of plastic
[1970-Jan-15 02:18:20.376871]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-15 02:18:20.391647]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-15 02:18:20.573762]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-15 02:20:55.201576]: Expend Buffer: false
[1970-Jan-15 02:20:55.304473]: Syncing turned true
[1970-Jan-15 02:20:55.390794]: PRU Event: PRU_SYNC_ON(7)
[1970-Jan-15 02:20:55.393336]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-15 02:20:55.721068]: Toolhead 0  ADC Error: 1
[1970-Jan-15 02:20:56.714929]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-15 02:20:56.716625]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-15 02:20:56.718446]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-15 02:20:56.730386]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-15 02:20:56.732277]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-15 02:20:56.733978]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-15 02:21:23.239209]: Expected packet id: 0x2b, Got packet id: 0x2a, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xda,0x0,0xf,0x23,0x0,0x1,0x0,0xd7,0x0,0x1,0x6d,0x51,0x3,0x4e,0x1,0x0,0x0,0x0,0x0,0x2,0x58,0x0,0x2a,0x29,0x69,0x7e,0xe9,

[1970-Jan-15 02:21:23.252257]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-15 02:22:01.230970]: Toolhead 0 state error: 80
[1970-Jan-15 02:22:03.420714]: toolhead pausing
[1970-Jan-15 02:22:03.426149]: Last sync period had (0,1206,9027) buffer fulls due to suspend moves
[1970-Jan-15 02:22:03.427915]: Syncing turned false
[1970-Jan-15 02:22:03.429598]: quack pause: true
[1970-Jan-15 02:22:03.454795]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-15 02:22:03.560772]:  axis running: 0
[1970-Jan-15 02:22:03.720836]: Last sync period had (0,1206,9045) buffer fulls due to suspend moves
[1970-Jan-15 02:22:03.724547]: Libstepper All Axis Abort
[1970-Jan-15 02:22:03.726289]: Clear Toolhead Buffer
[1970-Jan-15 02:22:03.824477]: clear toolhead buffer acknowledged
[1970-Jan-15 02:22:03.882429]: toolhead unpausing
[1970-Jan-15 02:22:03.884796]: quack pause: false
[1970-Jan-15 02:22:03.972805]: Expend Buffer: true
[1970-Jan-15 02:22:04.016165]: Last sync period had (0,1206,9066) buffer fulls due to suspend moves
[1970-Jan-15 02:22:04.018005]: Syncing turned false
[1970-Jan-15 02:22:04.140565]: GAP: Query->Await
[1970-Jan-15 02:22:04.172813]: GAP: Await
[1970-Jan-15 02:22:04.215926]: GAP: Await
[1970-Jan-15 02:22:04.257536]: GAP: Await
[1970-Jan-15 02:22:04.289805]: GAP: Await
[1970-Jan-15 02:22:04.344382]: GAP: Await
[1970-Jan-15 02:22:04.358843]: Toolhead 0  ADC Error: 0
[1970-Jan-15 02:22:04.388245]: GAP: Await
[1970-Jan-15 02:22:04.423601]: GAP: Await
[1970-Jan-15 02:22:04.465864]: GAP: Await
[1970-Jan-15 02:22:04.481230]: TH0: Retreived step position 13631759
[1970-Jan-15 02:22:04.509613]: wait for PRU status in get position
[1970-Jan-15 02:22:04.511518]: wait for PRU status in get position
[1970-Jan-15 02:22:04.513306]: GAP: Await->Done(Query)
[1970-Jan-15 02:22:04.706776]: Suspend
[1970-Jan-15 02:22:04.714982]: Suspend index 393 found, A-pos 146.187
[1970-Jan-15 02:22:06.551307]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-15 02:22:09.711339]: GAP: Query->Await
[1970-Jan-15 02:22:09.792381]: GAP: Await
[1970-Jan-15 02:22:09.896431]: GAP: Await
[1970-Jan-15 02:22:09.932721]: TH0: Retreived step position 13631759
[1970-Jan-15 02:22:09.972751]: wait for PRU status in get position
[1970-Jan-15 02:22:09.974447]: wait for PRU status in get position
[1970-Jan-15 02:22:09.976059]: GAP: Await->Done(Query)
[1970-Jan-15 02:22:10.321634]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-15 02:22:10.323554]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-15 02:22:10.809399]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-15 02:22:24.141561]: Toolhead 0 state error: 0
[1970-Jan-15 02:25:18.285790]: Toolhead 0 state error: 56
[1970-Jan-15 02:25:19.290901]: Toolhead 0 state error: 0
[1970-Jan-15 11:03:53.154193]: TH0: 8 failures in last 65536 packets (0.012207%)
[1970-Jan-15 20:28:14.444633]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-15 20:28:14.446575]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-15 20:28:14.968710]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-15 20:28:33.803587]: Toolhead 0 state error: 80
[1970-Jan-15 20:31:35.644831]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-15 20:31:43.059649]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-15 20:31:50.459111]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-15 20:31:57.760666]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-15 20:31:58.951506]: Toolhead 0 state error: 0
[1970-Jan-15 20:32:05.308153]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-15 20:32:12.924786]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-15 20:32:20.416544]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-15 20:35:19.282670]: Toolhead 0 state error: 56
[1970-Jan-15 20:35:19.615271]: Toolhead 0 state error: 0
[1970-Jan-15 20:35:49.424095]: toolhead pausing
[1970-Jan-15 20:35:49.428813]: Last sync period had (0,1206,785955) buffer fulls due to suspend moves
[1970-Jan-15 20:35:49.430997]: Syncing turned false
[1970-Jan-15 20:35:49.432700]: quack pause: true
[1970-Jan-15 20:35:49.720817]: Last sync period had (0,1206,785964) buffer fulls due to suspend moves
[1970-Jan-15 20:35:49.722694]: Libstepper All Axis Abort
[1970-Jan-15 20:35:49.724432]: Clear Toolhead Buffer
[1970-Jan-15 20:35:49.762847]: clear toolhead buffer acknowledged
[1970-Jan-15 20:35:49.848967]: toolhead unpausing
[1970-Jan-15 20:35:49.860972]: quack pause: false
[1970-Jan-15 20:35:50.008472]: Expend Buffer: true
[1970-Jan-15 20:35:50.082338]: Last sync period had (0,1206,785979) buffer fulls due to suspend moves
[1970-Jan-15 20:35:50.084189]: Syncing turned false
[1970-Jan-15 20:35:50.299946]: GAP: Query->Await
[1970-Jan-15 20:35:50.342405]: TH0: Retreived step position 12845327
[1970-Jan-15 20:35:50.384336]: wait for PRU status in get position
[1970-Jan-15 20:35:50.386025]: wait for PRU status in get position
[1970-Jan-15 20:35:50.387674]: GAP: Await->Done(Query)
[1970-Jan-15 20:35:50.604177]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-15 20:35:50.606053]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-15 20:35:59.942660]: Last sync period had (0,1206,786300) buffer fulls due to suspend moves
[1970-Jan-15 20:35:59.944652]: Syncing turned false
[1970-Jan-15 20:35:59.947251]: Toolhead Abort
[1970-Jan-15 20:35:59.949004]: aborting pru with shutdown=true
[1970-Jan-15 20:35:59.962119]: Last sync period had (0,1206,786300) buffer fulls due to suspend moves
[1970-Jan-15 20:35:59.963915]: Libstepper All Axis Abort
[1970-Jan-15 20:35:59.965690]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-15 20:35:59.967419]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-15 20:36:00.219141]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-15 20:36:00.251362]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-15 20:36:00.360414]: Commanding stats update: Retract count: 1504
[1970-Jan-15 20:36:00.362177]: Toolhead 0 marked as possibly blocking!
[1970-Jan-15 20:36:00.555854]: Toolhead 0 done blocking!
[1970-Jan-15 20:36:00.739968]: GetToolUsageStats called in machine  state 0
[1970-Jan-15 20:36:00.752186]: Commanding tool usage stat retrieve
[1970-Jan-15 20:36:00.753859]: GetToolUsageState: Proceeds to 1
[1970-Jan-15 20:36:00.755490]: GetToolUsagState: Error from retrieve: 0x10a
[1970-Jan-15 20:36:00.824401]: Raw usage stats: retract 3001ct, extrusion 397682 steps, 1626 seconds, refurbed 0 times
[1970-Jan-15 20:36:00.964947]: GetToolUsageStats called in machine  state 1
[1970-Jan-15 20:36:00.966707]: VerifyToolUsageStatsRetrieved: Done
[1970-Jan-15 20:36:00.968503]: GetToolUsageState: Proceeds to 2
[1970-Jan-15 20:36:01.049443]: GetToolUsageStats called in machine  state 2
[1970-Jan-15 20:36:01.061559]: GetToolUsageState: Done, resets
[1970-Jan-15 20:36:12.589307]: Heater manager Set Target Temperature to 180, index 0
[1970-Jan-15 20:36:12.591493]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-15 20:36:13.584240]: libstepper: true toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-15 20:36:13.586095]: HOME: axis 1, speed 22, flip dir false, sp true, blocking false
[1970-Jan-15 20:36:13.602498]: Load Sense Limit Method: 1
[1970-Jan-15 20:36:13.605260]: Last sync period had (0,1206,786423) buffer fulls due to suspend moves
[1970-Jan-15 20:36:13.607147]: Libstepper All Axis Abort
[1970-Jan-15 20:36:20.185750]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-15 20:36:20.193947]: Toolhead Abort
[1970-Jan-15 20:36:20.195772]: aborting pru with shutdown=true
[1970-Jan-15 20:36:20.198518]: Last sync period had (0,1206,786702) buffer fulls due to suspend moves
[1970-Jan-15 20:36:20.200692]: Libstepper All Axis Abort
[1970-Jan-15 20:36:20.255416]: HOME: 1 homing: Limit Detected!: 
[1970-Jan-15 20:36:22.162321]: libstepper: true toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-15 20:36:22.164154]: HOME: axis 0, speed 22, flip dir false, sp true, blocking false
[1970-Jan-15 20:36:22.166272]: Load Sense Limit Method: 0
[1970-Jan-15 20:36:22.170893]: Last sync period had (0,1206,786786) buffer fulls due to suspend moves
[1970-Jan-15 20:36:22.172842]: Libstepper All Axis Abort
[1970-Jan-15 20:36:29.627227]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-15 20:36:36.355072]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-15 20:36:36.356947]: Toolhead Abort
[1970-Jan-15 20:36:36.358727]: aborting pru with shutdown=true
[1970-Jan-15 20:36:36.364321]: Last sync period had (0,1206,787446) buffer fulls due to suspend moves
[1970-Jan-15 20:36:36.366145]: Libstepper All Axis Abort
[1970-Jan-15 20:36:36.420966]: HOME: 0 homing: Limit Detected!: 
[1970-Jan-15 20:36:37.497905]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-15 20:36:39.202465]: HOME: axis 2, speed 8, flip dir false, sp true, blocking false
[1970-Jan-15 20:36:44.097154]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-15 20:36:50.447234]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-15 20:36:56.808818]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-15 20:37:00.805191]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-15 20:37:00.807040]: Toolhead Abort
[1970-Jan-15 20:37:00.808915]: aborting pru with shutdown=false
[1970-Jan-15 20:37:00.817599]: Last sync period had (0,1206,788691) buffer fulls due to suspend moves
[1970-Jan-15 20:37:00.820902]: Libstepper All Axis Abort
[1970-Jan-15 20:37:00.915480]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-15 20:37:01.397520]: HOME: axis 2, speed 0.5, flip dir false, sp true, blocking true
[1970-Jan-15 20:37:01.786647]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-15 20:37:02.114014]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-15 20:37:02.461103]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-15 20:37:02.810946]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-15 20:37:03.161078]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-15 20:37:03.502886]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-15 20:37:03.841786]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-15 20:37:04.173891]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-15 20:37:04.622838]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-15 20:37:05.047740]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-15 20:37:05.064857]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-15 20:37:05.077324]: Toolhead Abort
[1970-Jan-15 20:37:05.079147]: aborting pru with shutdown=false
[1970-Jan-15 20:37:05.082165]: Last sync period had (0,1206,788727) buffer fulls due to suspend moves
[1970-Jan-15 20:37:05.083970]: Libstepper All Axis Abort
[1970-Jan-15 20:37:05.176422]: HOME: 2 homing: Limit Detected!: 
[1970-Jan-15 20:37:05.421910]: GAP: Query->Await
[1970-Jan-15 20:37:05.446422]: TH0: Retreived step position 11993359
[1970-Jan-15 20:37:05.489055]: wait for PRU status in get position
[1970-Jan-15 20:37:05.491009]: wait for PRU status in get position
[1970-Jan-15 20:37:05.493505]: GAP: Await->Done(Query)
[1970-Jan-15 20:37:05.780415]: Heater manager Set Target Temperature to 180, index 0
[1970-Jan-15 20:37:05.782355]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-15 20:37:06.791597]: Expecting 520130 steps extruded this print from 4791.62 mm of plastic
[1970-Jan-15 20:37:07.080529]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-15 20:37:07.082332]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-15 20:37:07.275459]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-15 20:38:26.147996]: Expend Buffer: false
[1970-Jan-15 20:38:26.187196]: Syncing turned true
[1970-Jan-15 20:38:26.229142]: PRU Event: PRU_SYNC_ON(7)
[1970-Jan-15 20:38:26.231095]: PRU Event: PRU_SYNC_DELAY(6)
[1970-Jan-15 20:38:26.381325]: Toolhead 0  ADC Error: 1
[1970-Jan-15 20:38:27.177429]: PRU Event: PRU_SYNC_DELAY(5)
[1970-Jan-15 20:38:27.179132]: PRU Event: PRU_SYNC_DELAY(4)
[1970-Jan-15 20:38:27.190876]: PRU Event: PRU_SYNC_DELAY(3)
[1970-Jan-15 20:38:27.192585]: PRU Event: PRU_SYNC_DELAY(2)
[1970-Jan-15 20:38:27.194247]: PRU Event: PRU_SYNC_DELAY(1)
[1970-Jan-15 20:38:27.196049]: PRU Event: PRU_SYNC_DELAY(0)
[1970-Jan-15 20:39:43.495846]: Steps overrun! last 65533 and just got 12
[1970-Jan-15 20:39:43.497560]: calculated 14
[1970-Jan-15 20:40:07.475473]: Expected packet id: 0x75, Got packet id: 0x0, Full packet: 
0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0x0,0x0,0x2d,0x0,0xcf,0x0,0xf,0x16,0xf8,0x1,0x0,0xd7,0x0,0x1,0x6d,0x51,0x3,

[1970-Jan-15 20:40:07.478354]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-15 20:40:08.432714]: Expected packet id: 0xac, Got packet id: 0xab, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xcf,0x0,0xf,0x18,0x4,0x1,0x0,0xd7,0x0,0x1,0x6d,0x51,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0xba,0x0,0xab,0xc4,0x6e,0xa1,0x3b,

[1970-Jan-15 20:40:08.434743]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-15 20:40:12.355636]: Expected packet id: 0x73, Got packet id: 0x72, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xcf,0x0,0xf,0x1c,0xa,0x1,0x0,0xd7,0x0,0x1,0x6d,0x51,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x2,0x11,0x0,0x72,0x9e,0xd5,0x4c,0x8e,

[1970-Jan-15 20:40:12.359195]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-15 20:41:06.672856]: Expected packet id: 0x1f, Got packet id: 0x6d, Full packet: 
0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0xf,0x0,0x2d,0x0,0xd1,0x0,0xf,0x45,0x16,0x1,0x0,0xd7,0x0,0x1,0x6d,0x51,0x3,0x4e,0x1,

[1970-Jan-15 20:41:06.675963]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-15 20:41:09.262900]: Expected packet id: 0x4d, Got packet id: 0x6d, Full packet: 
0x12,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0xf3,0xf,0x0,0x2d,0x0,0xd1,0x0,0xf,0x45,0xfe,0x1,0x0,0xd7,0x0,0x1,0x6d,0x51,0x3,0x4e,0x1,

[1970-Jan-15 20:41:09.264798]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-15 20:41:17.331756]: Expected packet id: 0xf8, Got packet id: 0xf7, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd2,0x0,0xf,0x48,0xc8,0x1,0x0,0xd7,0x0,0x1,0x6d,0x51,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x0,0xd1,0x0,0xf7,0x9a,0x3b,0x39,0x24,

[1970-Jan-15 20:41:17.333664]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-15 20:42:00.723621]: Expected packet id: 0xe6, Got packet id: 0xe5, Full packet: 
0xf3,0x0,0x0,0x2d,0x0,0xd7,0x0,0xf,0x5e,0x4b,0x1,0x0,0xd7,0x0,0x1,0x6d,0x51,0x3,0x4e,0x1,0x1,0x0,0x0,0x0,0x1,0x18,0x0,0xe5,0x89,0xcd,0xa1,0x88,

[1970-Jan-15 20:42:00.725547]: Toolhead 0 : Toolhead Response Fail with comm_error: 117  Retry # : 1
[1970-Jan-15 20:42:03.610222]: Toolhead 0 state error: 80
[1970-Jan-15 20:42:05.157537]: toolhead pausing
[1970-Jan-15 20:42:05.163144]: Last sync period had (0,5487,41160) buffer fulls due to suspend moves
[1970-Jan-15 20:42:05.164931]: Syncing turned false
[1970-Jan-15 20:42:05.167317]: quack pause: true
[1970-Jan-15 20:42:05.190451]: PRU Event: PRU_SYNC_OFF(0)
[1970-Jan-15 20:42:05.233656]:  axis running: 0
[1970-Jan-15 20:42:05.310452]:  axis running: 0
[1970-Jan-15 20:42:05.412230]: Last sync period had (0,5487,41160) buffer fulls due to suspend moves
[1970-Jan-15 20:42:05.415133]: Libstepper All Axis Abort
[1970-Jan-15 20:42:05.416880]: Clear Toolhead Buffer
[1970-Jan-15 20:42:05.520611]: clear toolhead buffer acknowledged
[1970-Jan-15 20:42:05.569615]: toolhead unpausing
[1970-Jan-15 20:42:05.571651]: quack pause: false
[1970-Jan-15 20:42:05.658619]: Expend Buffer: true
[1970-Jan-15 20:42:05.726044]: Last sync period had (0,5487,41181) buffer fulls due to suspend moves
[1970-Jan-15 20:42:05.727858]: Syncing turned false
[1970-Jan-15 20:42:05.887628]: GAP: Query->Await
[1970-Jan-15 20:42:05.968880]: GAP: Await
[1970-Jan-15 20:42:06.015789]: GAP: Await
[1970-Jan-15 20:42:06.058460]: GAP: Await
[1970-Jan-15 20:42:06.091815]: GAP: Await
[1970-Jan-15 20:42:06.141961]: GAP: Await
[1970-Jan-15 20:42:06.168741]: Toolhead 0  ADC Error: 0
[1970-Jan-15 20:42:06.193430]: GAP: Await
[1970-Jan-15 20:42:06.228830]: GAP: Await
[1970-Jan-15 20:42:06.274227]: GAP: Await
[1970-Jan-15 20:42:06.303311]: TH0: Retreived step position 14090511
[1970-Jan-15 20:42:06.327819]: wait for PRU status in get position
[1970-Jan-15 20:42:06.329510]: wait for PRU status in get position
[1970-Jan-15 20:42:06.331528]: GAP: Await->Done(Query)
[1970-Jan-15 20:42:06.412725]: Suspend
[1970-Jan-15 20:42:06.452262]: Suspend index 1944 found, A-pos 392.322
[1970-Jan-15 20:42:08.810217]: libstepper: false toolhead: false( ignored: false) acceleration_manager: true
[1970-Jan-15 20:42:11.611765]: GAP: Query->Await
[1970-Jan-15 20:42:11.672945]: GAP: Await
[1970-Jan-15 20:42:11.773487]: GAP: Await
[1970-Jan-15 20:42:11.847678]: GAP: Await
[1970-Jan-15 20:42:11.920900]: GAP: Await
[1970-Jan-15 20:42:11.971125]: TH0: Retreived step position 14090511
[1970-Jan-15 20:42:12.010720]: wait for PRU status in get position
[1970-Jan-15 20:42:12.012421]: wait for PRU status in get position
[1970-Jan-15 20:42:12.014758]: GAP: Await->Done(Query)
[1970-Jan-15 20:42:12.374618]: Heater manager Set Target Temperature to 215, index 0
[1970-Jan-15 20:42:12.376479]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-15 20:42:12.902008]: wait for heaters at target, wait bitmask 0x1
[1970-Jan-15 20:42:17.412877]: Toolhead 0 state error: 0
[1970-Jan-15 20:45:18.706393]: Toolhead 0 state error: 56
[1970-Jan-15 20:45:19.713674]: Toolhead 0 state error: 0
[1970-Jan-15 23:39:32.322231]: toolhead pausing
[1970-Jan-15 23:39:32.327070]: Last sync period had (0,5487,166452) buffer fulls due to suspend moves
[1970-Jan-15 23:39:32.328871]: Syncing turned false
[1970-Jan-15 23:39:32.330799]: quack pause: true
[1970-Jan-15 23:39:32.513469]: Last sync period had (0,5487,166461) buffer fulls due to suspend moves
[1970-Jan-15 23:39:32.515279]: Libstepper All Axis Abort
[1970-Jan-15 23:39:32.517022]: Clear Toolhead Buffer
[1970-Jan-15 23:39:32.544437]: clear toolhead buffer acknowledged
[1970-Jan-15 23:39:32.625309]: toolhead unpausing
[1970-Jan-15 23:39:32.627023]: quack pause: false
[1970-Jan-15 23:39:32.745773]: Expend Buffer: true
[1970-Jan-15 23:39:32.809100]: Last sync period had (0,5487,166476) buffer fulls due to suspend moves
[1970-Jan-15 23:39:32.821303]: Syncing turned false
[1970-Jan-15 23:39:32.906429]: GAP: Query->Await
[1970-Jan-15 23:39:32.951048]: TH0: Retreived step position 917775
[1970-Jan-15 23:39:33.019022]: wait for PRU status in get position
[1970-Jan-15 23:39:33.020956]: wait for PRU status in get position
[1970-Jan-15 23:39:33.022766]: GAP: Await->Done(Query)
[1970-Jan-15 23:39:33.168535]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-15 23:39:33.180655]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-15 23:39:36.876979]: libstepper: false toolhead: true( ignored: false) acceleration_manager: true
[1970-Jan-15 23:39:41.890701]: Last sync period had (0,5487,167049) buffer fulls due to suspend moves
[1970-Jan-15 23:39:41.892524]: Syncing turned false
[1970-Jan-15 23:39:41.894503]: TH0: 59 failures in last 33177 packets (0.177834%)
[1970-Jan-15 23:39:41.896457]: Toolhead Abort
[1970-Jan-15 23:39:41.898156]: aborting pru with shutdown=true
[1970-Jan-15 23:39:41.910858]: Last sync period had (0,5487,167049) buffer fulls due to suspend moves
[1970-Jan-15 23:39:41.913363]: Libstepper All Axis Abort
[1970-Jan-15 23:39:41.921470]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-15 23:39:41.923204]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-15 23:39:42.027455]: Heater manager Set Target Temperature to 0, index 0
[1970-Jan-15 23:39:42.029449]: Sent heater settings hold timeout 3min, rise timeout 1min, rise threshold 10C, sag threhsold 20C, overrun threshold 20C, fan preload 15C, preload tick delay 8900ticks, temperature freeze timeout 54464ms (may be discretized)
[1970-Jan-15 23:39:42.135771]: Commanding stats update: Retract count: 3026
[1970-Jan-15 23:39:42.138389]: Toolhead 0 marked as possibly blocking!
[1970-Jan-15 23:39:42.268173]: Toolhead 0 done blocking!
[1970-Jan-15 23:39:42.396467]: GetToolUsageStats called in machine  state 0
[1970-Jan-15 23:39:42.398342]: Commanding tool usage stat retrieve
[1970-Jan-15 23:39:42.401712]: GetToolUsageState: Proceeds to 1
[1970-Jan-15 23:39:42.404449]: GetToolUsagState: Error from retrieve: 0x10a
[1970-Jan-15 23:39:42.424424]: Raw usage stats: retract 6027ct, extrusion 444700 steps, 1835 seconds, refurbed 0 times
[1970-Jan-15 23:39:42.456166]: GetToolUsageStats called in machine  state 1
[1970-Jan-15 23:39:42.457903]: VerifyToolUsageStatsRetrieved: Done
[1970-Jan-15 23:39:42.459532]: GetToolUsageState: Proceeds to 2
[1970-Jan-15 23:39:42.498750]: GetToolUsageStats called in machine  state 2
[1970-Jan-15 23:39:42.520801]: GetToolUsageState: Done, resets